Parts

- 90 degree

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

Cost effective stopping power from the leader in cable-actuated disc brakes. - For use with short cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 215 g

- CNC-machined 7075 T-6 Aluminum - For singlespeed & 1X drivetrains - Cut from .160" material for strength and long life - For use with 9 or 10-speed drivetrains - Anodized with laser-etched graphics

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.

Crank Brothers' Quattro 3-hole cleats let you use Crank Bros. pedals with your road shoes. The cleat and walking plate mount directly to shoes that use a traditional 3-hole mounting setup. - Weight (pair): 86 grams - Shoe compatibility: LOOK/SPD-SL - Release angle: 15 or 20 degrees

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

- Chromoly cogs to fit any HG-splined cassette rear hubs

A modern take on the classic platform pedal style. DMR provides a large pedal body area and DU bushing system aimed to provide riders with control, durability and serviceability. - 15 x 95 x 25mm (L x W x H) - 8 replaceable M4x0.7x8 corner pins and 12 fitted non-replaceable pins per pedal - Designed with grease ports; 'V-lube' grease syringe included with pedals - Double concave pedal body for control and stability - Classic parallelogram shape - 9/16"

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

FSA PowerPro JIS Cartridge Bottom Brackets. - Includes bolts - Spindle Interface Type: Square Taper JIS - BB Shell Width (mm): 68 - BB/Frame Interface: English

This FSA MegaExo bottom bracket is for use MTB MegaExo cranksets with 24mm spindles. - Sealed bearings - Die-cast then CNC machined alloy bearing cups - Composite Di2-compatible adjustable center sleeve

Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.

Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.

Jagwire's Mountain Pro Inserts are the correct replacement pads for Jagwire's Mountain Pro brake shoes (sold separately). These pads feature Jagwire's tried-and-true compound for excellent stopping power and durability.

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.

- All around rubber compound - Compound resists heat buil-up and brake fade - Excellent wet weather performance

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Compatible with Shimano Dura-Ace R9170, Metrea U5000, Ultegra R8070, and Road RS305, RS405, RS505, and RS805 - Compatible with Rever MCX1 Flat-Mount and MCX2 Flat-Mount

- High quality, durable stainless steel machined braking surface ensures consistent stopping power and resists corrosion - Reinforced rotor design improves stability and resists warping - Compatible with all sintered, semi-metallic, and organic/resin disc brake pad compounds

Open end caps have no o-ring or nylon ring. - Step-down design mates 5mm housing with 4mm stops - Material: chrome-plated steel - 100-pack

Road Pro Brake kits offer enhanced performance and style. Designed to work with and match Jagwire's Pro Shift kits, the Pro polished brake cables combined with their Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all needed parts included, Jagwire's Road Pro Brake kits are easy to install. - Pro level polished cables combined with Slick-Lube, Kevlar reinforced housing enhance braking performance - All parts needed for a complete brake cable and housing install on road bikes are included - Kits provide longer housing and cables for large frame with full housing or mechanical disc brakes

The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No

S1 Rustbuster is a basic, affordable replacement 1/8" chain. - For non-derailleur bikes: BMX, cruisers, etc. - Rustbuster rust-proof finish, suitable for beach environments and winter commuting - Includes KMC Master Link - Links (links): 112 - Color: Silver - Width: 9.3 mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Chain Connection Type: Reusable Master Link - Half Link Chain: No

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Shimano, SRAM, and KMC 11-speed chains

The Z8 chain features inner plate chamfering and a z-bridge shape, making it suitable for a variety of riding styles. - Inner plate chamfering to smooth shifting - Z-bridge shape - Designed for use with internally geared hubs - Compatible with Shimano, SRAM, and Campagnolo drivetrains - Suitable for MTB, road, and comfort riding - 1/2 x 3/32"

- X8.99: stretchproof, chamfered plate, full-nickel plated chain for 5-8 speed and great for internal geared hubs - Z72: chamfered inner plates with Bulls-eye rivets for 5-8 speed - Z51: standard bushingless, chamfered plate chain for 5-8 speed - Z30: economy bushingless chain for 5-8 speed - Width = 3/32-inch