Filter By:
Tools/Maintenance

$41.99
This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups

$59.99 - $269.99
- Light viscosity oil for deep penetration with teflon for durability
- Law prohibits orm-D materials from shipping by air

$9.99
TB-6617: Cotterless crank tool for Shimano splined octalink and ISIS, Use with 8mm hex key wrench and 15mm spanner.
TB-6616: Cotterless crank tool for use with 8 mm hex key wrench and 15mm spanner.

$13.99
Remove both Presta and Schrader valve cores with Stan's Core Remover. It's necessary to remove the valve core to inject sealant into the tire.

$25.99
If lightweight, minimalist, and wallet-friendly are at the top of your tool priority list, look no further than the EMT 6 Tool. With six different bits, you'll have plenty to manage common roadside mechanicals.
- Forged steel bits are nickel plated for corrosion resistance.
- 3, 4, 5, and 6mm hex bits
- T25 Torx and Phillips head screwdriver bits.

$30.00
With nine different corrosion-resistant bits, the EMT 9 Tool has all the tools you need for almost any repair. And with an innovative SWAT saddle mount, your multi-tool is out of the way, but right there when you need it.
- Fiberglass-reinforced nylon SWAT storage cradle works with all current Specialized saddles.
- Forged aluminum side plates.
- Forged steel bits are nickel plated for corrosion resistance.
- 2, 2.5, 3, 4, 5, 6, and 8mm hex bits
- T25 Torx and Phillips head screwdriver bits.

$30.00
A simple, compact system to carry everything you need to fix a flat without weighing you down.
- Patent pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber
- CO2 valve head and 2-sided tire lever snap into place for compact and secure storage
- Holds a single threaded 16g CO2 cartridge
- Fits up to 80mm long tube valve stems

$50.00
SBC torque wrenches are preset to the exact torque specs needed for the different fasteners found on Specialized bikes. The ergonomic handles provide a perfect grip.
• 45 in-lbf (5.1 Nm) is used on road and MTB 4-bolt stems, Shiv and Shiv TT seat collars, MTB bolt-style collars
• 55in-lbf (6.2 Nm) is used on Venge seat collar and round road seat collars
• 120 in-lbf (13.5Nm) is used on single bolt seatposts
• Preset torque value with a unique spin free design to eliminate the possibility of over torqueing fasteners

$30.00 - $40.00
Specialized's Top Cap Chain Tool replaces your top cap and places a chain tool and spare chain quick link inside your bicycle fork's steerer tube. This way you'll never forget your chain tool. This tool can be installed in any 1-1/8th inch steerer tube that is at least 32mm deep. It's available in models that work with either aluminum or carbon steerer tubes.

$16.99
DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes
- Brake Fluid Type: DOT 5.1
- Bottle Size (Brake Fluid): 4 oz
- Application (Brake Fluid): Disc Brakes

$19.99 - $43.99
- Concentrated degreaser and wash that cleans grime, oil and greases gently
- Safe on all surfaces

$18.99 - $49.99
- Xtreme chain lube is formulated for long-distance and extreme off-road conditions
- MFR bonds to metal surfaces and resists build-Up and tackiness, in addition to shedding water

$24.99
Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts.
Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush.
16-ounce bottle

$13.99
Park's Bottom Bracket/Cassette Tool for Campagnolo is an indispensable tool for your Campagnolo drivetrain. It's for installing and removing all Record, Chorus, Centaur and Athena bottom brackets, and all Campagnolo cassette lockrings.

$11.99
Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across.
- Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings
- Fits the SRAM XX1 11-speed cassettes
- Also fits Shimano disc brake lockrings
- Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

$22.99
The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs.
-Utilizes a 12mm guide pin to stabilize the tool during use
- Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter)
- Fits some Shimano and similar disc brake rotor lockrings

$13.99
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across.
- Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings
- Fits the SRAM XX1 11-speed cassettes
- Also Fits Shimano disc brake lockrings
- Guide pin stabilizes tool

$18.99
The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

$11.99
The Park FR-4 Freewheel Remover fits Atom, Regina, splined Zeus and some Schwinn-approved freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

$23.99
The Park FR-6 Freewheel Remover fits most 4-notch BMX and singlespeed freewheels. It can be held with a wrench or vise and its narrow profile allows use without removal of cones and locknuts.

$34.99
The Low Profile I-Beam Mini Tool includes 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen and regular screwdriver. It's the perfect mini-tool to get you out of binds or make quick adjustments. And, it conveniently tucks into a pocket or pack.

$44.99
Park's Needle Nose Pliers are professional quality, 6-inches long, and made from forged, heat-treated chromoly steel. For ease of use they have a hidden spring, cutting jaws and 5 different gripping and crimping areas. Plus, they have soft-touch, dual-density handles for an excellent grip.

$11.99
Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.

$27.99
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

$13.99
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

$4.99
• Updated with a new material and new design
• Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed
• Perfect for tight beads and tubeless tires
• Sold in sets of two.

$15.99
• Updated to fit better in the hand with a more rounded, smoother shape
• The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market
• Nickel plated for years of service
• Designed for the home mechanic.
FIts the following size spoke nipples:
• .127" (3.23mm)
• .130" (3.30mm)
• .136" (3.45mm)

$47.99
Jagwire's Pro Internal Routing Tool simplifies routing through a frame, using powerful magnets to safely and easily guide cables, housing, and e-shift wires.
- A retractable, flexible magnet can be inserted into the receiving end of an internal cable run to find the magnetic adapter and easily pull it through
- Adapters for inner cables, hydraulic hose, and Di2 e-Tube wires are included
- The adapters nest neatly inside tool body when not in use
Page 1 of 2
Next page