Skip to main content

Filter By:

Wheels

Wahoo KICKR SNAP 142 x 12mm Thru Axle Adapter
$115.99
Our thru-axle kit comes with everything you need to mount most 12x142 thru-axle bikes on your KICKR SNAP indoor trainer. This accessory will work with all editions of the Wahoo KICKR SNAP. It includes the following: - Threaded axle spacer M12 x 1.75 Coarse - M12 x 1.5 Medium - M12 x 1.0 Fine - End Cap
Stan's NoTubes Downhill Rim Strip
$33.99
Stan's Downhill Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Tubeless Valve Stems
$24.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
49°N 20-inch BMX Sealed Bearing Front
$149.99
Durable, stealth all-black BMX wheel spinning on premium sealed cartridge bearings throughout. - Pinned construction double-wall rim with a generous 28mm internal width for an excellent pairing with tires up to 2.4 wide - Stronger female nutted front alloy hub (Cr-Mo axle) for optimized use with pegs - Anodized black brake track for clean looks when used with brakeless setups - Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 982g
49°N Bolted Skewer Set
$19.99
Front and rear skewer set, suitable for MTBs - Durable chromoly axles with lightweight alloy nuts - Tightens with allen key
49°N MTB 29-inch Disc 6-Bolt/TA Rear
$159.99
A tough, tubeless-compatible 29-inch disc wheel in traditional non-boost thru-axle spacing. - Pinned construction double-wall rim with new-school 29mm internal width, tubeless compatibility, offset/asymmetrical construction, and hookless construction - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech thru-axle alloy 6-Bolt hubs w/serviceable cup and cone bearings - Shimano steel freehub: 8/9/10/11sp MTB compatibility - 6-Bolt disc compatible only - Reinforced head straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1236g
49°N MTB/Urban 26-inch Front Wheel
$99.99
A tough, no-nonsense workhorse 26-inch rim brake wheel with MTB hub spacing that's perfectly suited to a wide range of applications from MTB through to urban/commute/trekking. - Pinned construction double-wall rim with generous 20mm internal width suitable for a wide range of tire widths - Stainless Steel eyelets & CNC machined sidewall w/wear indicator - Joytech alloy QR hub w/serviceable cup and cone bearings - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 944g
49°N MTB/Urban 26-inch Rear
$129.99
A tough, no-nonsense workhorse 26-inch rim brake wheel with MTB hub spacing that's perfectly suited to a wide range of applications from MTB to urban/commuter/trekking. - Pinned construction double-wall rim with generous 20mm internal width suitable for a wide range of tire widths - Stainless Steel eyelets & CNC machined sidewall w/wear indicator - Joytech alloy QR hub w/serviceable cup and cone bearings - Shimano steel freehub body: /8/9/10/11sp MTB cassette compatibility - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 1198g
49°N MTB/Urban 26-inch Rim & Disc Rear
$104.99
An affordable and clever dual-duty rim and disc brake compatible 26-inch wheelset that combines MTB hub spacing with screw-on freewheel compatibility for a wheelset that's perfectly suited to trekking, MTB, and urban use. - Alex Rims Z1000 pinned construction single-wall rim with 20mm internal width suitable for a wide range of tire widths & brushed sidewall - Joytech 6-Bolt disc alloy nutted hubs w/serviceable cup and cone bearings - Anodized brake track for clean looks when used with a disc brakes - Conventional screw-on freewheel fitting (7/8/9/10sp compatible) - Plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 1138g
49°N MTB/Urban 27.5 Rim Brake Rear
$114.99
A tough, no-nonsense workhorse 27.5-inch rim brake wheelset with MTB hub spacing that's perfectly suited to a wide range of applications from MTB to urban/commute/trekking. - Pinned construction double-wall rim with generous 20mm internal width suitable for a wide range of tire widths - Stainless Steel eyelets & CNC machined sidewall w/wear indicator - Joytech alloy QR hub w/serviceable cup and cone bearings - Shimano steel freehub body: 8/9/10/11sp MTB cassette compatibility - Reinforced head straight gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 1228g
49°N MTB/Urban 29-inch/700c Freewheel/Nutted Rear
$89.99
An affordable and durable 29/700c rim brake wheelset with MTB hub spacing and thread-on freewheel compatibility that's perfectly suited to a wide range of applications from MTB through to urban/commute/trekking. - Alex Rims Z1000 pinned construction single wall rim with generous 20mm internal width suitable for a wide range of tire widths & brushed sidewall - Joytech alloy nutted hubs w/serviceable cup and cone bearings - Conventional thread-on freewheel fitting (7/8/9/10sp compatible) - Plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1149g
49°N MTB/Urban 29-inch/700c Rim Brake Front
$99.99
A tough, no-nonsense workhorse 29/700c rim brake wheel that's perfectly suited to a wide range of applications from MTB to urban/commute/trekking. - Pinned construction double-wall rim with generous 20mm internal width suitable for a wide range of tire widths - Stainless Steel eyelets & CNC machined sidewall w/wear indicator - Joytech alloy QR hubs w/serviceable cup and cone bearings - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Not tubeless compatible - Weight: 1035g
49°N MTB/Urban 29-inch/700c Rim Brake Rear
$129.99
A tough, no-nonsense workhorse 29/700c rim brake wheel with MTB hub spacing that's perfectly suited to a wide range of applications from MTB to urban/commute/trekking. - Pinned construction double-wall rim with generous 20mm internal width suitable for a wide range of tire widths - Stainless Steel eyelets & CNC machined sidewall w/wear indicator - Joytech alloy QR hubs w/serviceable cup and cone bearings - Shimano steel freehub body w/8/9/10/11sp MTB cassette compatibility - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Not tubeless compatible - Weight: 1284g
49°N Road 26 x 1-3/8-inch Front
$79.99
An affordable wheel with a durable 36H single wall construction and premium Stainless Steel spokes to fit older/classic road bikes built around the 26 x 1-3/8(590mm ISO) wheel size. - Alex Rims X404 pinned construction classic box-section single-wall rim w/brushed sidewalls - Generous 20mm internal width for compatibility with a wide range of tire widths - Joytech nutted steel hub w/serviceable cup and cone bearings - Hub uses smaller diameter 5/16" axle for compatibility with the smaller fork slots on older Raleigh 3-speeds (compatible with standard 9mm dia. dropouts also) - Straight gauge 2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1109g
49°N Road 26 x 1-3/8-inch Rear
$89.99
An affordable freewheel-compatible wheel with a durable 36H single wall construction and premium Stainless Steel spokes to fit older/classic road bikes built around the 26 x 1-3/8(590mm ISO) wheel size. - Alex Rims X404 pinned construction classic box-section single-wall rim w/brushed sidewalls - Generous 20mm internal width for compatibility with a wide range of tire widths - Joytech nutted steel hub w/serviceable cup and cone bearings - Conventional thread-on freewheel fitting (6/7sp compatible) (axle can be re-spaced for 5sp compatibility) - Straight gauge 2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1243g
49°N Track 700c Fixed/Free Rear
$144.99
A durable 32H aero track wheel in stealth black finish w/new-school 17mm internal width and flexible fixed/free rear compatibility that's fast enough for the velodrome and tough enough for the streets. - Pinned construction double wall rim w/aero 30mm deep profile, wear indicator, and anodized matte black finish - CNC sidewalls with post-anodized finish for clean brakeless all-black stealth looks - Joytech high flange nutted axle 120mm alloy nutted hubs w/100% serviceable cup and cone bearings - Fixed/free rear threads for compatibility with either 1.375" x 24TPI screw-on singlespeed freewheel or fixed sprocket & lockring (stepped 1.375" x 24TPI/1.29" x 24TPI) - Reinforced head plain gauge 2.0mm SUS304 Stainless Steel spokes w/12mm brass nipples - 32H/3X lacing - Presta Drilling - Axle nuts, 16T cog, high-pressure rim tape included - Weight: 1183g
49°N Track 700c Front
$129.99
A durable 32H aero track wheel in stealth black finish with new-school 17mm internal width thats fast enough for the velodrome and tough enough for the streets. - Pinned construction double-wall rim w/aero 30mm deep profile, wear indicator, and anodized matte black finish - CNC sidewalls with post-anodized finish for clean brakeless all-black stealth looks - Joytech high flange nutted axle 100mm alloy nutted hub w/100% serviceable cup and cone bearings - Reinforced head plain gauge 2.0mm SUS304 Stainless Steel spokes w/12mm brass nipples - 32H/3X lacing - Presta Drilling - Axle nuts & high-pressure rim tape included - Weight: 1082g
Roval Rapide CLX 50 Front
First came our CLX 64. Then the 32s. And after racking up multiple wins in Grand Tours, Worlds, and everything in between, we knew that our best bet was to take the line to new heights, or well, new depths. We needed to design one wheel that was a true quiver killer. One wheel that had all the aerodynamic benefits of the 64 in a package that climbed like the 32, and that's where the all-new CLX 50 comes in. When we set out to create the CLX 50, we had clear goals in mind, create wheels that are 48 to 54mm deep, aerodynamically optimized, ultra-wide, and under 1400 grams. This meant that they'd have to borrow some weight savings techniques that we developed for the CLX 32, while taking some aero guidance from the CLX 64, if we were going to create what we like to call "the unicorn wheel." Even though the CLX 50 is similar in weight to many wheels in the "lightweight" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CLX 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. After finding the optimized rim shape that supported our svelte weight requirements, we opted to lace the rims, via 16 DT Swiss Aerolite spokes, to our Aero Flange (AF) hub with the legendary CeramicSpeed bearings. And when it was time for final testing validation, we were left with a 50mm-deep, 1375-gram clincher wheelset that's not only 200 grams lighter than the competition's similar depth wheel, but is also measurably faster in every conceivable test than each wheel in its category. - Assembly Method: Hand-built - Brake Track Height: 12mm - Braking Surface: Carbon Fiber - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads - Front Hub: Roval AF1, CeramicSpeed bearings - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 50mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal, 29.4mm external - Spoke Count: 16 - Spoke Pattern: Radial - Spoke Type: DT Swiss Aerolite T-head - Weight: 607g
Page 1 of 1